Item repaired: Water System
Name: Master Specialist Hecle Phan
(EST) Time: 1:25 pm GMT+8
Logs:
**MSpc. Hecle Phan made sure the system was off before finding the stub-outs on the pipes, marking them to be capped.
** MSpc. Hecle Phan pulled out his solder gun and some caps. He then carefully solders the caps to the stub-out of each pipe before putting the solder gun back in his belt** MSpc. Hecle Phan then grabs the air compressor hose and pressure gauge before installing the adapter and tee to one of the stub-outs that he forgot to solder, oops
* MSpc. Hecle Phan made sure the rest of the stub-outs were glued before turning on the compressor, pressurizing the pipes while keeping an eye on the gauge. He would then turn off the compressor as the needle of the gauge reached eighty PSI
** MSpc. Hecle Phan took out the adapter and tee after time was up before grabbing his plasma torch, setting the temperature to high before carefully cutting off the caps. He then set the temperature of the plasma torch back to low and started sealing the pipes, being mindful not to let any pressure escape.
** MSpc. Hecle Phan sealed each pipe of the water system before turning off his plasma torch and clipping it to his belt. He then went back to the control panel of the system and started the motor.
